All for Joomla All for Webmasters
Cloud 9 Vaping Co - Fueled By Enthusiasts

iJoy RDTA Box Mod 200W Starter Kit

 5,500

The iJoy RDTA Box 200W Starter Kit is the culmination of design and engineering of iJoy, integrating the critically acclaimed iJoy Combo RDTA platform into a cleverly designed box mod chassis that features an easily fillable 12.8ml tank capacity and a dual battery powered 200W chipset.

Clear

The iJoy RDTA Box 200W Starter Kit is the culmination of design and engineering of iJoy, integrating the critically acclaimed iJoy Combo RDTA platform into a cleverly designed box mod chassis that features an easily fillable 12.8ml tank capacity and a dual battery powered 200W chipset. Designed as a flagship system that covers power, versatility, and longevity, the RDTA Box is a unique and industry leading platform that excels in each of those categories, packing in a unmatched 12.8ml tank capacity with the incredibly versatile iJoy IMCInterchangeable Deck system. The reservoir of the RDTA Box has been integrated into the top portion of the chassis, allowing for efficient use of the design, with a dedicated 15mm diameter fill port in which users can quickly and easily refill the entire tank. The IMC system allows for flexible use and integration of iJoy’s entire family, with up to eleven total build deck options (sold separately) that cover the entire spectrum of needs and features. Included with each set is the two post IMC3 deck that provides a flexible and versatile build deck alongside the new IMC Coil 0.15 ohm that features a prebuilt coil design intended to be powered between 50 to 100W. The RDTA Box features a new IWEPAL powered chipset capable of 5 to 200W of output across four output modes, full temperature control support, and a vibrant, vertically stacked 0.96 inch OLED screen. The device is powered by dual high amperage 18650 batteries (sold separately) loaded from the sliding battery door located at the side of the chassis. Unrivaled in capacity and versatility while packing in a 95% Power Efficient IWEPAL chipset capable of up to 200W, iJoy’s RDTA Box 200W Starter Kit entrenches itself as this year’s ultimate builder orientated all in one system.

Please Note: Batteries must be matched in brand, model, sizing and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.

Product Features:

  • 5 to 200W Output
    • 0.05 to 3.0 ohm Minimum Atomizer Resistance
    • 1 to 9V Output
    • 1 to 45A Output
    • Four Setting Output Mode
      • Hard
      • Normal
      • Soft
      • User
        • Customized Working Waveband
    • Firmware Upgradeable
    • 95% Power Efficiency
  • Temperature Control Suite
    • Ni200 Nickel Support
    • Titanium Support
    • Stainless Steel Support
    • Adjustable Initial Resistance
    • 300 to 600 Degrees Fahrenheit Output Range
    • 0.06 to 3.0 ohm Atomizer Resistance Range
  • 0.96″ OLED Screen
    • Vertically Stacked Matrix
    • Output Wattage and Temperature
    • Output Voltage
    • Mode and Heating Element
    • Atomizer Resistance
    • Output Current
    • Battery Life Indicator
    • Rotating Screen
    • Atomizer Resistance
    • LED Light Set
  • Sliding Battery Door
    • Dual 18650 Battery Powered
      • Sold Separately
  • Integrated Combo RDTA Platform
    • IMC Interchangeable Build Deck System
      • IMC3 Deck (Preinstalled)
        • Two Post
          • Dual Terminal Per Post
          • 2.5mm Diameter per Terminal
          • Side Mounted Phillips Screws
        • Dual Coil Compatible
        • Quad Wicking Ports
          • Sidewall Cutouts
      • IMC Coil 0.15 ohm
        • Prebuilt Sub-Ohm Coil
        • Ceramic Deck
        • 50 to 100W
        • Organic Cotton Wicking
  • Full Range Tank Reservoir
    • 12.8ml Tank Capacity
    • Top Fill Design
      • Dedicated Threaded Fill Port
      • 15mm Diameter
      • Pour to Fill
  • Dual Adjustable Airflow
    • 15mm by 1.5mm Each Airslot
    • 10mm Wide Bore Drip Tip
  • Stainless Steel 510 Connector
    • Spring Loaded Brass 510 Pin
  • PCB Temp/Low Battery/Atomizer Short/Low Resistance Protectio


Product Dimensions:

  • 55mm by 28mm by 135mm

Product Includes:

  • One iJoy RDTA Box
  • One IMC3 Deck
  • One IMC Coil 0.15 ohm
  • One Silicone Cap Cover
  • One Silicone RDTA Plug
  • One Phillips Screwdriver
  • One Hard Bristle Nylon Brush
  • Two Prebuilt Fused Clapton Coils
  • Two Strips of Organic Cotton
  • Spare Parts Pack
  • Micro USB Cable
  • User Manual

Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.

Advanced User Item. Use At Your Own Risk!

NOTE:  Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by C9VCo and any and all of C9VCo parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. C9VCo and any and all of C9VCo parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). C9VCo and any and all of C9VCo’s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.

Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.

C9VCo will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.

C9VCo will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the use of this product.

Reviews


There are no reviews yet.

Be the first to review “iJoy RDTA Box Mod 200W Starter Kit”